Part 6 Registration

Tracking Down the Problem Part 6 Design Registration, Displacement or Distortion

Displacement - Example: A round fill edged with a column (satin) stitch, column does not line up.

Common Causes	Remedies
Framing (Hooping)	Correct fabric tension, proper loading on the machine. Check for mechanical looseness of frames.
Backing	Correct type, weight and number of pieces used. Proper framing of backing.
Pull compensation in the design.	Edit or repunch the design.
Machine speed.	Adjust machine speed, normally lower it.

Distortion - Example: Fabric puckers around the design after unhooping.

Common Causes	Remedies
Excessive pulling of the fabric after framing goods.	Frame smoothly, avoid pulling of fabric after it is hooped. Watch grain of fabric for straightness.
Backing.	Correct type, weight and number of pieces used. Proper framing of backing.
Incorrect size or type of needle.	Change to correct size and type of needle for fabric.
Too many stitches in the design.	Edit or repunch design for fabric type.
Obstruction or mechanical problem in frame or frame sash movement.	Turn off power and move frame, check carefully for obstruction and remove. Repair equipment problem.

[ Up ]